Commercial Residential Trac-Rite Zip-Roll Screen Door Operators 955WL Door
Description
The 955WL earns high marks for strength. It's ideal for the same light-commercial uses as the Model 955. In addition, Trac-Rite's windlock system provides maximum wind resistance for this model. As wind blows against the 955WL, the curtain's windlocks engage with the door guide for a strong interlocking grip. This grip keeps the curtain securely in the guide. Available in custom sizes from 8'W up to 12'W x 3'H up to 12'8"H in 1" increments. Maximum heights vary depending on width. The 955WL features a 26-gauge, rigid-rib steel curtain that is durable, attractive, and requires little maintenance. The 955WL's drums and helical torsion springs provide solid curtain support and balancing; while the permanently-sealed ball bearings assure smooth operation.
Windlock Applications
Auto Body Shops
Boat Houses
Cold Storage
Dock Doors
Machine Shops
Post Frame Buildings
Sheds
Warehousing Applications
High Eave Structures with Relatively Low Door Heights
NOTE: Doors should not be used in applications that require fire rated or explosion proof doors. Heavy industrial and complex HVAC System (high negative or positive pressure) applications should also be avoided.
Specifications
| Design Type | Live axle: door axle rotates in bracket bearing during operation. |
| Drums | Stamped, continuously welded at the hub. 12" diameter x 1-1/2" wide. 16-gauge, zinc-coated steel. Three drums with doors up to 8' wide, four drums with doors over 8' wide. |
| Springs | Helical torsion. One spring for all width doors less than 5' high. One spring for doors 7'11" wide and smaller, two springs for doors 8' wide and larger.
Axle 1-5/16" outside diameter, schedule 80 steel pipe. |
| Curtain | Roll-formed sections, factory-seamed from 26-gauge, Grade 80 galvanized steel. Siliconized polyester finish in eleven standard colors. Full-length felt tape at each drum. |
| Curtain Windlocks | 10-gauge, zinc-coated steel, secured to door with two 3/16" rivets. |
| Bottom Assembly | Zinc-coated steel bottom angle mounted to corrosion-resistant aluminum extrusion with stainless steel bolts. TPE blade astragal also included. |
| Brackets | 10-gauge, cold-formed, zinc-coated steel. Grease-packed ball bearings are factory installed in the bracket. |
| Guides | 16-gauge, zinc-coated, 2-3/4" deep. Featuring polypropylene guide runners to assure smooth operation and prevent steel-on-steel contact. Guide windlock bar manufactured from 12-gauge, zinc-coated steel. |
| Interior Lock | 12-gauge, zinc-coated steel slide bolt engages a lock strike attached to the side guide. Two locks per door fasten to the bottom assembly and are suitable for padlocking. |
| Mounting Fasteners | Steel or wood fasteners included. Masonry fasteners sold separately. |
| Door Stop | 12-gauge, zinc-coated, L-shaped door stops. Mounts to guides. |
| Pull Rope Handle | Molded plastic rope handle with long-lasting rope. |
Note: Product specifications are subject to change without notice.
Wind Load Ratings
All Trac-Rite door models, both standard and windlock, are put through rigorous wind testing. The testing is witnessed and certified by an independent test lab.
| 955WL Door Width | 955WL Door PSF Rating |
| 8'0" | 33.0 |
| 9'0" | 32.0 |
| 10'0" | 32.0 |
| 11'0" | 32.0 |
| 12'0" | 32.0 |
Installation
After reviewing the complete installation instructions, installing a Trac-Rite 955WL doors are easy to install!
Installation Outline
1. Assemble brackets and guides to door nest.
2. Hoist door in place and attach brackets.
3. Attach guides, tension the door, cut bands, and install door stops.
4. Adjust and fasten guides. Install lock assembly and rope.
You're now ready to use your Trac-Rite 955WL door!
