Haas aluminum commercial garage doors
Haas Commercial Aluminum overhead sectional garage doors are ideal for Automobile Dealerships, Fire Stations, Service Stations, Quick Lube Operations… where clean & stylish appearance, strength, & corrosion resistance are important. Note: these doors provide excellent protection from wind, rain, and snow, but they are essentially uninsulated.
Haas commercial aluminum overhead door design
Haas Commercial Aluminum Doors are comprised of Aluminum Rail & Stile Frames that may be combined with Aluminum Panels and a wide range of Glazing Panels to provide the appearance, performance, and visibility to fit your facility.
Haas Commercial Aluminum Door sections are engineered with 0.065 in minimum Aluminum Alloy tubular extrusions with thru‑bolt construction and 1.75 in thick door sections that are available in any height. Bottom rails, top rails and end stiles vary depending on the specific door model and size (see below). Solid Section Aluminum Panels are available in 0.04 in stucco embossed or 0.05 in smooth aluminum finish, in a range of color options, and a wide variety of glazing materials are available for window sections.
Haas commercial aluminum overhead door models
Choose from two commercial aluminum overhead door models:
Haas CA‑220 Heavy‑Duty Frame Overhead Doors
Model CA‑220 Maximum Door Size is 28'-2" wide by 16' high:
- CA‑220 Doors wider than 12' have built in struts, and doors wider than 18'‑2" have an additional 'T'‑shaped cap strut
- CA‑220 Doors up to 18'‑2" wide have 4 in bottom rails, top rails, and end stiles
- CA‑220 Doors wider than 18'‑2" have 6 in bottom rails and top rails
Standard color for Model CA‑220 doors is clear anodized, and color anodizing and special paint finishes are also optionally available:
Standard base colors
Dark Bronze Anodized
Haas CA‑110 narrow line frame overhead doors
Model CA‑110 Maximum Door Size is 16'‑2" wide by 14' high:
- CA‑110 Doors wider than 12' have built in struts on each section
- CA‑110 Doors up to 13'‑11" wide have 3 in bottom rails, top rails, and end stiles
- CA‑110 Doors greater than 13'‑11" wide have 4 in bottom rails
Standard color for Model CA‑110 doors is clear anodized, and color anodizing and special paint finishes are also optionally available:
Dark Bronze Anodized
Haas commercial door hardware
Haas commercial door track is furnished in 2" or 3" galvanized steel (depending on door size), with compatible mountings for either steel or wood door jambs. For angle‑mount track, door widths are 2" wider than opening. Track rollers are 2" or 3" case‑hardened inner and outer steel races with 10‑ball, prelubricated bearings.
Hinges, brackets, and reinforced struts are hot‑dipped galvanized steel, and fasteners are plated for maximum corrosion resistance.
Standard computer‑calibrated counterbalancing torsion springs are designed for at least 10,000 cycles, and alternative optional springs are available with 25,000, 50,000, and 100,000 cycle capability.
Haas commercial aluminum door options
Additional available options include 2 or 3 in track, exhaust port, cam safety device, spring bumpers, chain hoist operation, high cycle springs, high cycle rollers, wind load rating (CA‑220 only) pass door (CA‑220 only), top header seal, car wash cutout, and security bars.